A large selection of 3M, MSA, North Safety, Allegro and Survivair Respirators, Cartridges, Filters, Supplied Air Systems, Air Purifying Respirators, N95 - N100 Masks, Adflo Systems, Face Shields, Self-Contained Breathing Apparatus, Paint Respirators.
When should a respirator be used?
Workers should use respirators for protection from contaminants in the air only if other hazard control methods are not practical or possible under the circumstances. Respirators should not be the first choice for respiratory protection in workplaces. They should only be used:
* when engineering or administrative controls are not technically feasible
* while engineering controls are being installed or repaired
* when emergencies or other temporary situations arise (e.g., maintenance operations).
How should you control respiratory hazards?
Respiratory hazards can include airborne contaminants such as dusts, mists, fumes, and gases, or oxygen-deficient atmospheres. Well designed and maintained engineering controls are the preferred methods of controlling worker exposure to hazardous contaminants in the air. These control methods include:
* mechanical ventilation
* enclosure or isolation of the process or work equipment
* proper control and use of process equipment, and
* process modifications including substitution of less hazardous materials where possible.
Administrative controls may be used in addition to engineering controls. Administrative controls limit workers' exposures by scheduling reduced work times in contaminant areas or by implementing other such work rules. These control measures have many limitations because the hazard is not removed. Administrative controls are not generally favoured because they can be difficult to implement, maintain and are not reliable.
Are there some things that you should know before you choose a respirator?
Employers should have a written respirator program that describes the proper procedures for selecting and operating respiratory protective equipment. The correct use of a respirator is just as important as selecting the proper respirator. Parts of the respirator program deal with finding out what hazards are present and how much protection that the workers will need. Other parts should describe how to wear and look after the respirator.
Without a complete respiratory protection program, people will probably not receive the best protection from a respirator even if it is the correct choice for a specific job. A respiratory protection program includes several components such as:
* hazard identification and control
* exposure assessment
* respirator selection
* respirator fit-testing
* training program
* inspection and record keeping
* cleaning and sanitizing respirators
* repairing and maintaining respirators
* proper storage of respirators
* health surveillance
* standard operating procedures (available in written form)
* program evaluation.
A physician should examine the medical and psychological fitness of workers. This should be done before they are assigned to work in areas where respirators may be required. The workers must be physically fit to carry out the work while wearing respiratory equipment. They must also be psychologically comfortable (e.g., not claustrophobic) about wearing respirators.
Workers with beards, long sideburns, or even a two-day stubble may not wear respirators because the hair breaks the seal between the skin and the respirator mask. Wearing eyeglasses would also break the respirator seal. This means that the respirator mask will "leak" and will not provide the needed respiratory protection. Also, if a worker has facial scars or an acne problem, the facial skin may not be able to form a good seal with a respirator mask.
What are the different classes of respirators?
The two main types are air-purifying respirators (APRs) and supplied-air respirators (SARs).
Air-purifying respirators can remove contaminants in the air that you breathe by filtering out particulates (e.g., dusts, metal fumes, mists, etc.). Other APRs purify air by adsorbing gases or vapours on a sorbent (adsorbing material) in a cartridge or cannister. They are tight-fitting and are available in several forms:
* mouth bit respirator (fits in the mouth and comes with a nose clip to hold nostrils closed - for escape purposes only)
* quarter-mask (covering the nose and mouth),
* half-face mask (covering the face from the nose to below the chin), or
* full facepiece (covering the face from above the eyes to below the chin).
Respirators with a full facepiece also protect the eyes from exposure to irritating chemicals.
Supplied-air respirators (SARs) supply clean air from a compressed air tank or through an air line. This air is not from the work room area. The air supplied in tanks or from compressors must meet certain standards for purity and moisture content (e.g., CSA Standard Z180.1-00: Compressed Breathing Air and Systems).
Supplied-air respirators may have either tight-fitting or loose-fitting respiratory inlets. Respirators with tight-fitting respiratory inlets have half or full facepieces. Types with loose-fitting respiratory inlets can be hoods or helmets that cover the head and neck, or loose-fitting facepieces with rubber or fabric side shields. These are supplied with air through airlines.
Examples of these classes of respirators include:
Air-purifying respirators (APRs):
* particulate respirators (previously called dust, fume, and mist respirators or masks),
* chemical cartridge respirators that can have a combination of chemical cartridges, along with a dust prefilter: this combination provides protection against different kinds of contaminants in the air
* gas masks (contain more adsorbent than cartridge-type respirators and can provide a higher level of protection than chemical cartridge respirators)
* powered air-purifying respirators (PAPRs).
Supplied-air respirators (SARs):
* self-contained breathing apparatus (SCBA),
* airline supplied-air respirators,
* protective suits that totally encapsulate the wearer's body and incorporate a life-support system.
There are some combinations of airline respirators and SCBAs that allow workers to work for extended periods in oxygen-deficient areas or where there are airborne toxic contaminants. The auxiliary or backup SCBA source allows the worker to escape with an emergency source of air if the airline source fails.
There are also combination air-purifying and atmosphere supplying respirators. These will offer worker protection if the supplied-air system fails, if the appropriate air-purifier units are selected. These cannot be used in oxygen-deficient areas or where the air concentration of a contaminant exceeds the IDLH level (i.e., immediately dangerous to life or health).
|
|
|
Discount prices on work respirators, full face respirator masks, mold safety respirators, painting respirator masks, air purifying respirators, cartridges, filters, supplied air systems
|
|
|
